지금 보고 계신 제품의 기업이에요
노벨정밀금속(주)
제품 상세 정보
THREAD
| NOMONAL SIZE OR DIAMETER OF STUD-BOLT [D] | D=1″[25MM] & SMALLER | D=1 ⅛[28MM] & LARGER | |
|---|---|---|---|
Thread | INCH Series | Unified Coarse Thread Series Class 2A and 2B ANSI B1.1 | Unified 8-Thread[3-pitch] Series Class 2A and 2B ANSI B1.1 |
| METRIC series | METRIC Coarse Thread Series Class 6G and 6H JIS B0209/ISO 261 | METRIC 3-pitch Series Class 6G and 6H JIS B0209/ISO 261 | |
DIMESION OF NUT
| INCH SERIES | METRIC SERIES |
|---|---|
| Comform to Heavy Hex Nuts of ANSI B 18.2.2 Double chamfered of Washer faced | Comform to Heavy Hex Nuts of ANSI 18.2.2 Double chamfered of Washer faced |
Chemical Requirements
| SPECIFICATIONGRADE | C | SI | MN | PMAX | SMAX | NI | CR | MO | VANADIUM |
|---|---|---|---|---|---|---|---|---|---|
| ASTM A193 GR B7 | 0.37-0.49 | 0.15-0.35 | 0.65-1.10 | 0.035 | 0.04 | 0.75-1.20 | 0.15-0.25 | ||
| ASTM A193 GR B7M | 0.37-0.49 | 0.15-0.35 | 0.65-1.10 | 0.035 | 0.04 | 0.75-1.20 | 0.15-0.25 | ||
| ASTM A193 GR B16 | 0.36-0.47 | 0.15-0.35 | 0.45-0.70 | 0.035 | 0.04 | 0.80-1.15 | 0.50-0.65 | 0.25-0.35 | |
| ASTM A193 GR B8 | Max 0.08 | Max 1.00 | Max 2.00 | 0.045 | 0.03 | 8.00-10.5 | 18.0-20.0 | ||
| ASTM A193 GR B8M | Max 0.08 | Max 1.00 | Max 2.00 | 0.045 | 0.03 | 10.0-14.0 | 16.0-18.0 | 2.0-3.0 | |
| ASTM A193 GR B6 | Max 0215 | Max 1.00 | Max 1.00 | 0.045 | 0.03 | 11.5-13.5 | |||
| ASTM A320 GR L7 | 0.38-0.48 | 0.15-0.35 | 0.75-1.00 | 0.035 | 0.04 | 0.80-1.10 | 0.15-0.25 | ||
| ASTM A320 GR L7M | 0.38-0.48 | 0.15-0.35 | 1.75-1.00 | 0.035 | 0.04 | 0.80-1.10 | 0.15-0.25 | ||
| ASTM A320 GR B8 | Max 0.08 | Max 1.00 | Max 2.00 | 0.045 | 0.03 | 8.00-10.5 | 18.0-20.0 | ||
| ASTM A320 GR B8M | Max 0.08 | Max 1.00 | Max 2.00 | 0.045 | 0.03 | 10.0-14.0 | 16.0-18.0 | 2.0-3.0 | |
| ASTM A325 TYPE 1 | 0.28-0.55 | Min 0.60 | 0.040 | 0.05 | Boron Min 0.0005 | ||||
| ASTM A325 TYPE 2 | 0.15-0.34 | Min 0.70 | 0.040 | 0.05 | |||||
| ASTM A354 GR BC | 0.30-0.53 | 0.035 | 0.04 | ||||||
| ASTM A354 GR BD | 0.30-0.53 | 0.035 | 0.04 | ||||||
| ASTM A449 TYPE1 | 0.28-0.55 | Min 0.60 | 0.040 | 0.05 | Boron Min 0.0005 | ||||
| ASTM A449 TYPE 2 | 0.15-0.38 | Min 0.70 | 0.040 | 0.05 | |||||
| ASTM A490 TYPE1 | 0.30-0.48 | 0.040 | 0.04 | ||||||
| JIS G4303 SUS310S | Max 0.08 | Max 1.50 | Max 2.00 | 0.045 | 0.03 | 19.0-22.0 | 24.0-26.0 | ||
| JIS G4105 SCM 435 | 0.33-0.38 | 0.15-0.35 | 0.60-0.85 | 0.030 | 0.03 | 0.90-1.20 | 0.15-0.30 | ||
| JIS G4105 SCM 440 | 0.38-0.43 | 0.15-0.35 | 0.60-0.85 | 0.030 | 0.03 | 0.90-1.20 | 0.15-0.30 | ||
| JIS G4107 SNB 5 | Min 0.10 | Max 1.00 | Max 1.00 | 0.040 | 0.03 | 4.00-6.00 | 0.40-0.65 | ||
| JIS G4107 SNB 7 | 0.38-0.48 | 0.20-0.35 | 0.75-1.00 | 0.040 | 0.04 | 0.80-1.10 | 0.15-0.25 | ||
| JIS G4107 SNB 16 | 0.36-0.44 | 0.15-0.35 | 0.45-0.70 | 0.040 | 0.04 | 0.80-1.15 | 0.50-0.65 | ||
| JIS G4051 S45C | 0.42-0.48 | Max 0.40 | 0.60-0.90 | 0.040 | 0.035 | ||||
| ASTM A194 GR 2H | Min 0.40 | Max 0.40 | Max 1.00 | 0.040 | 0.05 | ||||
| ASTM A194 GR 2HM | Min 0.40 | 0.15-0.35 | Max 1.00 | 0.040 | 0.05 | ||||
| ASTM A194 GR 7M | 0.37-0.49 | 0.15-0.35 | 0.65-1.10 | 0.040 | 0.04 | 0.75-1.20 | 0.15-0.25 | ||
| ASTM A194 GR 4 | 0.40-0.50 | 0.15-0.35 | 0.70-0.90 | 0.035 | 0.04 | 0.20-0.30 | |||
| ASTM A194 GR 7 | 0.37-0.49 | 0.15-035 | 0.65-1.10 | 0.040 | 0.04 | 0.75-1.20 | 0.15-0.25 | ||
| ASTM A194 GR 8 | Max 0.06 | Max 1.00 | Max 2.00 | 0.045 | 0.03 | 8.00-10.5 | 18.0-20.0 | ||
| ASTM A194 GR 8M | Max 0.08 | Max 1.00 | Max 2.00 | 0.045 | 0.03 | 10.0-14.0 | 16.0-18.0 | 2.00-3.00 | |
| ASTM A563 GR A.B.C | Max 0.55 | 0.012 | 0.15 | ||||||
| ASTM A563 GR GR D | Max 0.55 | Min 0.30 | 0.040 | 0.05 | |||||
| ASTM A563 GR GR DH | 0.20-0.55 | Min 0.60 | 0.040 | 0.05 | |||||
Mechanical Requirements
| SPECIFICATIONGRADE | C | SI | MN | PMAX | SMAX | NI | CR | MO | VANADIUM |
|---|---|---|---|---|---|---|---|---|---|
| ASTM A193 GR B7 | 0.37-0.49 | 0.15-0.35 | 0.65-1.10 | 0.035 | 0.04 | 0.75-1.20 | 0.15-0.25 | ||
| ASTM A193 GR B7M | 0.37-0.49 | 0.15-0.35 | 0.65-1.10 | 0.035 | 0.04 | 0.75-1.20 | 0.15-0.25 | ||
| ASTM A193 GR B16 | 0.36-0.47 | 0.15-0.35 | 0.45-0.70 | 0.035 | 0.04 | 0.80-1.15 | 0.50-0.65 | 0.25-0.35 | |
| ASTM A193 GR B8 | Max 0.08 | Max 1.00 | Max 2.00 | 0.045 | 0.03 | 8.00-10.5 | 18.0-20.0 | ||
| ASTM A193 GR B8M | Max 0.08 | Max 1.00 | Max 2.00 | 0.045 | 0.03 | 10.0-14.0 | 16.0-18.0 | 2.0-3.0 | |
| ASTM A193 GR B6 | Max 0215 | Max 1.00 | Max 1.00 | 0.045 | 0.03 | 11.5-13.5 | |||
| ASTM A320 GR L7 | 0.38-0.48 | 0.15-0.35 | 0.75-1.00 | 0.035 | 0.04 | 0.80-1.10 | 0.15-0.25 | ||
| ASTM A320 GR L7M | 0.38-0.48 | 0.15-0.35 | 1.75-1.00 | 0.035 | 0.04 | 0.80-1.10 | 0.15-0.25 | ||
| ASTM A320 GR B8 | Max 0.08 | Max 1.00 | Max 2.00 | 0.045 | 0.03 | 8.00-10.5 | 18.0-20.0 | ||
| ASTM A320 GR B8M | Max 0.08 | Max 1.00 | Max 2.00 | 0.045 | 0.03 | 10.0-14.0 | 16.0-18.0 | 2.0-3.0 | |
| ASTM A325 TYPE 1 | 0.28-0.55 | Min 0.60 | 0.040 | 0.05 | Boron Min 0.0005 | ||||
| ASTM A325 TYPE 2 | 0.15-0.34 | Min 0.70 | 0.040 | 0.05 | |||||
| ASTM A354 GR BC | 0.30-0.53 | 0.035 | 0.04 | ||||||
| ASTM A354 GR BD | 0.30-0.53 | 0.035 | 0.04 | ||||||
| ASTM A449 TYPE1 | 0.28-0.55 | Min 0.60 | 0.040 | 0.05 | Boron Min 0.0005 | ||||
| ASTM A449 TYPE 2 | 0.15-0.38 | Min 0.70 | 0.040 | 0.05 | |||||
| ASTM A490 TYPE1 | 0.30-0.48 | 0.040 | 0.04 | ||||||
| JIS G4303 SUS310S | Max 0.08 | Max 1.50 | Max 2.00 | 0.045 | 0.03 | 19.0-22.0 | 24.0-26.0 | ||
| JIS G4105 SCM 435 | 0.33-0.38 | 0.15-0.35 | 0.60-0.85 | 0.030 | 0.03 | 0.90-1.20 | 0.15-0.30 | ||
| JIS G4105 SCM 440 | 0.38-0.43 | 0.15-0.35 | 0.60-0.85 | 0.030 | 0.03 | 0.90-1.20 | 0.15-0.30 | ||
| JIS G4107 SNB 5 | Min 0.10 | Max 1.00 | Max 1.00 | 0.040 | 0.03 | 4.00-6.00 | 0.40-0.65 | ||
| JIS G4107 SNB 7 | 0.38-0.48 | 0.20-0.35 | 0.75-1.00 | 0.040 | 0.04 | 0.80-1.10 | 0.15-0.25 | ||
| JIS G4107 SNB 16 | 0.36-0.44 | 0.15-0.35 | 0.45-0.70 | 0.040 | 0.04 | 0.80-1.15 | 0.50-0.65 | ||
| JIS G4051 S45C | 0.42-0.48 | Max 0.40 | 0.60-0.90 | 0.040 | 0.035 | ||||
| ASTM A194 GR 2H | Min 0.40 | Max 0.40 | Max 1.00 | 0.040 | 0.05 | ||||
| ASTM A194 GR 2HM | Min 0.40 | 0.15-0.35 | Max 1.00 | 0.040 | 0.05 | ||||
| ASTM A194 GR 7M | 0.37-0.49 | 0.15-0.35 | 0.65-1.10 | 0.040 | 0.04 | 0.75-1.20 | 0.15-0.25 | ||
| ASTM A194 GR 4 | 0.40-0.50 | 0.15-0.35 | 0.70-0.90 | 0.035 | 0.04 | 0.20-0.30 | |||
| ASTM A194 GR 7 | 0.37-0.49 | 0.15-035 | 0.65-1.10 | 0.040 | 0.04 | 0.75-1.20 | 0.15-0.25 | ||
| ASTM A194 GR 8 | Max 0.06 | Max 1.00 | Max 2.00 | 0.045 | 0.03 | 8.00-10.5 | 18.0-20.0 | ||
| ASTM A194 GR 8M | Max 0.08 | Max 1.00 | Max 2.00 | 0.045 | 0.03 | 10.0-14.0 | 16.0-18.0 | 2.00-3.00 | |
| ASTM A563 GR A.B.C | Max 0.55 | 0.012 | 0.15 | ||||||
| ASTM A563 GR GR D | Max 0.55 | Min 0.30 | 0.040 | 0.05 | |||||
| ASTM A563 GR GR DH | 0.20-0.55 | Min 0.60 | 0.040 | 0.05 | |||||
산업용 볼트 및 너트 제조 업체
노벨정밀금속(주)는 1991년 5월 1일 FASTENERS 분야의 전문인력들이 모여서 회사를 설립하여 밖으로는 경쟁력 강화와 안으로는 내실 있는 운영으로 고객과 함께 성장에 성장을 거듭하고 있습니다. 또한 노벨정밀금속(주)는 그동안 개발한 SYSTEM을 운용한 결과 산업설비, 발전설비, 조선소, 육·해상 구조물등, 대·소형공상에 좋은 호응을 얻어 고객으로부터 많은 격려를 받고 있습니다.
2009년부터는 신규사업분야인 로봇사업에 진출하여 LCD반송로봇, 산업용 로봇 및 FA부분에서도 많은 고객들로부터 좋은 호응을 얻어 나날이 바전을 거듭해 나가고 있습니다. 이러한 결과는 저희 노벨정밀금속(주)를 믿고 맡겨주신 고객 여러분의 덕분이라 여기며 앞으로는 더욱 더 모든 제품의 품질향상과 납기준수를 위해 최선을 다할 것이며 항상 믿고 맡길 수 있는 회사가 되도록 노력 하겠습니다.
대한민국 조선기자재 산업 온라인 플랫폼
ⓒ2025 Komarine Inc. All rights reserved.
대한민국 조선기자재 산업 온라인 플랫폼
ⓒ2025 Komarine Inc. All rights reserved.