지금 보고 계신 제품의 기업이에요
삼양금속공업(주)
제품 상세 정보
Butt Welding Type ECC. Reducer For Cu-Ni Pipe
■ Material : EEMUA 146 7060X
Unit:mm
| Pipe | Dimension | Remark | ||||||
|---|---|---|---|---|---|---|---|---|
| N/D | D | d | T | t | H | |||
| 16Bar | 20Bar | 16Bar | 20Bar | |||||
| 1 1/2"X3/4" | 44.5 | 25.0 | 2.5 | 2.5 | 2.5 | 2.5 | 64 | SEAMLESS |
| 1 1/2"X1" | 44.5 | 30.0 | 2.5 | 2.5 | 2.5 | 2.5 | 64 | SEAMLESS |
| 1 1/2"X1 1/4" | 44.5 | 38.0 | 2.5 | 2.5 | 2.5 | 2.5 | 64 | SEAMLESS |
| 2"X1" | 57.0 | 30.0 | 2.5 | 2.5 | 2.5 | 2.5 | 76 | SEAMLESS |
| 2"X1 1/4" | 57.0 | 38.0 | 2.5 | 2.5 | 2.5 | 2.5 | 76 | SEAMLESS |
| 2"X1 1/2" | 57.0 | 44.5 | 2.5 | 2.5 | 2.5 | 2.5 | 76 | SEAMLESS |
| 2 1/2"X1 1/4" | 76.1 | 38.0 | 2.5 | 2.5 | 2.5 | 2.5 | 89 | SEAMLESS |
| 2 1/2"X1 1/2" | 76.1 | 44.5 | 2.5 | 2.5 | 2.5 | 2.5 | 89 | SEAMLESS |
| 2 1/2"X2" | 76.1 | 57.0 | 2.5 | 2.5 | 2.5 | 2.5 | 89 | SEAMLESS |
| 3"X1 1/2" | 88.9 | 44.5 | 2.5 | 2.5 | 2.5 | 2.5 | 89 | SEAMLESS |
| 3"X2" | 88.9 | 57.0 | 2.5 | 2.5 | 2.5 | 2.5 | 89 | SEAMLESS |
| 3"X2 1/2" | 88.9 | 76.1 | 2.5 | 2.5 | 2.5 | 2.5 | 89 | SEAMLESS |
| 4"X2" | 108.0 | 57.0 | 3.0 | 3.0 | 2.5 | 2.5 | 102 | SEAMLESS |
| 4"X2 1/2" | 108.0 | 76.1 | 3.0 | 3.0 | 2.5 | 2.5 | 102 | SEAMLESS |
| 4"X3" | 108.0 | 88.9 | 3.0 | 3.0 | 2.5 | 2.5 | 102 | SEAMLESS |
| 6"X2 1/2" | 159.0 | 76.1 | 3.0 | 3.5 | 2.5 | 2.5 | 140 | SEAMLESS |
| 6"X3" | 159.0 | 88.9 | 3.0 | 3.5 | 2.5 | 2.5 | 140 | SEAMLESS |
| 6"X4" | 159.0 | 108.0 | 3.0 | 3.5 | 3.0 | 3.0 | 140 | SEAMLESS |
| 8"X4" | 219.1 | 108.0 | 4.0 | 4.5 | 3.0 | 3.0 | 152 | SEAMLESS |
| 8"X6" | 219.1 | 159.0 | 4.0 | 4.5 | 3.0 | 3.5 | 152 | SEAMLESS |
| 10"X6" | 267.0 | 159.0 | 4.5 | 5.5 | 3.0 | 3.5 | 178 | SEAMLESS |
| 10"X8" | 267.0 | 219.1 | 4.5 | 5.5 | 4.0 | 4.5 | 178 | SEAMLESS |
| 12"X6" | 323.9 | 159.0 | 5.5 | 7.0 | 3.0 | 3.5 | 203 | SEAMLESS |
| 12"X8" | 323.9 | 219.1 | 5.5 | 7.0 | 4.0 | 4.5 | 203 | SEAMLESS |
| 12"X10" | 323.9 | 267.0 | 5.5 | 7.0 | 4.5 | 5.5 | 203 | SEAMLESS |
*NOTE :
1. Dimension Per EEMUA 146
2. Process : Cold Forming
3. Heat Treatment : Annealing After Cold Forming
4. Temp & Hold Time : 750℃±50℃, 30Min / Inch(THK)
Butt Welding Type ECC. Reducer For Cu-Ni Pipe
■ Material : EEMUA 146 7060X
Unit:mm
| Pipe | Dimension | Remark | ||||||
|---|---|---|---|---|---|---|---|---|
| N/D | D | d | T | t | H | |||
| 16Bar | 20Bar | 16Bar | 20Bar | |||||
| 14"X8" | 368.0 | 219.1 | 6.5 | 8.0 | 4.0 | 4.5 | 330 | WELDED |
| 14"X10" | 368.0 | 267.0 | 6.5 | 8.0 | 4.5 | 5.5 | 330 | WELDED |
| 14"X12" | 368.0 | 323.9 | 6.5 | 8.0 | 5.5 | 7.0 | 330 | WELDED |
| 16"X10" | 419.0 | 267.0 | 7.0 | 9.0 | 4.5 | 5.5 | 356 | WELDED |
| 16"X12" | 419.0 | 323.9 | 7.0 | 9.0 | 5.5 | 7.0 | 356 | WELDED |
| 16"X14" | 419.0 | 368.0 | 7.0 | 9.0 | 6.5 | 8.0 | 356 | WELDED |
| 18"X12" | 457.2 | 323.9 | 8.0 | 9.5 | 5.5 | 7.0 | 381 | WELDED |
| 18"X14" | 457.2 | 368.0 | 8.0 | 9.5 | 6.5 | 8.0 | 381 | WELDED |
| 18"X16" | 457.2 | 419.0 | 8.0 | 9.5 | 7.0 | 9.0 | 381 | WELDED |
| 20"X14" | 508.0 | 368.0 | 8.5 | 11.0 | 6.5 | 8.0 | 508 | WELDED |
| 20"X16" | 508.0 | 419.0 | 8.5 | 11.0 | 7.0 | 9.0 | 508 | WELDED |
| 20"X18" | 508.0 | 457.2 | 8.5 | 11.0 | 8.0 | 9.5 | 508 | WELDED |
| 24"X16" | 610.0 | 419.0 | 10.5 | 13.0 | 7.0 | 9.0 | 508 | WELDED |
| 24"X18" | 610.0 | 457.2 | 10.5 | 13.0 | 8.0 | 9.5 | 508 | WELDED |
| 24"X20" | 610.0 | 508.0 | 10.5 | 13.0 | 8.5 | 11.0 | 508 | WELDED |
| 28"X18" | 711.0 | 457.2 | 12.0 | 15.0 | 8.0 | 9.5 | 610 | WELDED |
| 28"X20" | 711.0 | 508.0 | 12.0 | 15.0 | 8.5 | 11.0 | 610 | WELDED |
| 28"X24" | 711.0 | 610.0 | 12.0 | 15.0 | 10.5 | 13.5 | 610 | WELDED |
*NOTE :
1. Dimension Per EEMUA 146
2. Process : Cold Forming
3. Heat Treatment : Annealing After Cold Forming
4. Temp & Hold Time : 750℃±50℃, 30Min / Inch(THK)
Butt Welding Type ECC. Reducer
■ Material : 2.1972.22
Unit:mm
| Pipe | Dimension | Remark | |||||||
|---|---|---|---|---|---|---|---|---|---|
| N/D | D | d | T | t | L | L1 | |||
| 10Bar | 14Bar | 10Bar | 14Bar | ||||||
| DN25XDN20 | 30.3 | 25.0 | 1.5 | - | 1.5 | - | 35 | 10 | SEAMLESS |
| DN32XDN25 | 38.0 | 30.0 | 1.5 | - | 1.5 | - | 50 | 10 | SEAMLESS |
| DN40XDN32 | 44.5 | 38.0 | 1.5 | - | 1.5 | - | 80 | 10 | SEAMLESS |
| DN40XDN25 | 44.5 | 30.0 | 1.5 | - | 1.5 | - | 80 | 10 | SEAMLESS |
| DN50XDN40 | 57.0 | 44.5 | 1.5 | - | 1.5 | - | 80 | 10 | SEAMLESS |
| DN50XDN32 | 57.0 | 38.0 | 1.5 | - | 1.5 | - | 80 | 10 | SEAMLESS |
| DN50XDN25 | 57.0 | 30.0 | 1.5 | - | 1.5 | - | 80 | 10 | SEAMLESS |
| DN65XDN50 | 76.0 | 57.0 | 2.0 | - | 1.5 | - | 90 | 10 | SEAMLESS |
| DN65XDN40 | 76.0 | 44.5 | 2.0 | - | 1.5 | - | 90 | 10 | SEAMLESS |
| DN65XDN32 | 76.0 | 38.0 | 2.0 | - | 1.5 | - | 90 | 10 | SEAMLESS |
| DN80XDN65 | 89.0 | 76.0 | 2.0 | 2.5 | 2.0 | - | 90 | 10 | SEAMLESS |
| DN80XDN50 | 89.0 | 57.0 | 2.0 | 2.5 | 1.5 | - | 90 | 10 | SEAMLESS |
| DN80XDN40 | 89.0 | 44.5 | 2.0 | 2.5 | 1.5 | - | 90 | 10 | SEAMLESS |
| DN100XDN80 | 108.0 | 89.0 | 2.5 | - | 2.0 | 2.5 | 100 | 12 | SEAMLESS |
| DN100XDN65 | 108.0 | 76.0 | 2.5 | - | 2.0 | - | 100 | 12 | SEAMLESS |
| DN100XDN50 | 108.0 | 57.0 | 2.5 | - | 1.5 | - | 100 | 12 | SEAMLESS |
| DN125XDN100 | 133.0 | 108.0 | 2.5 | 3.0 | 2.5 | - | 140 | 12 | SEAMLESS |
| DN125XDN80 | 133.0 | 89.0 | 2.5 | 3.0 | 2.0 | 2.5 | 140 | 12 | SEAMLESS |
| DN125XDN65 | 133.0 | 76.0 | 2.5 | 3.0 | 2.0 | - | 140 | 12 | SEAMLESS |
| Pipe | Dimension | Remark | |||||||
|---|---|---|---|---|---|---|---|---|---|
| N/D | D | d | T | t | L | L1 | |||
| 10Bar | 14Bar | 10Bar | 14Bar | ||||||
| DN150XDN125 | 159.0 | 133.0 | 2.5 | 3.0 | 2.5 | 3.0 | 150 | 15 | SEAMLESS |
| DN150XDN100 | 159.0 | 108.0 | 2.5 | 3.0 | 2.5 | - | 150 | 15 | SEAMLESS |
| DN150XDN80 | 159.0 | 89.0 | 2.5 | 3.0 | 2.0 | 2.5 | 150 | 15 | SEAMLESS |
| DN200XDN150 | 219.0 | 159.0 | 3.0 | 3.5 | 2.5 | 3.0 | 155 | 15 | SEAMLESS |
| DN200XDN125 | 219.0 | 133.0 | 3.0 | 3.5 | 2.5 | 3.0 | 155 | 15 | SEAMLESS |
| DN200XDN100 | 219.0 | 108.0 | 3.0 | 3.5 | 2.5 | - | 155 | 15 | SEAMLESS |
| DN250XDN200 | 267.0 | 219.0 | 3.0 | 4.0 | 3.0 | 3.5 | 210 | 16 | SEAMLESS |
| DN250XDN150 | 267.0 | 159.0 | 3.0 | 4.0 | 2.5 | 3.0 | 210 | 16 | SEAMLESS |
| DN250XDN125 | 267.0 | 133.0 | 3.0 | 4.0 | 2.5 | 3.0 | 210 | 16 | SEAMLESS |
| DN300XDN250 | 324.0 | 267.0 | 4.0 | 5.0 | 3.0 | 4.0 | 210 | 16 | SEAMLESS |
| DN300XDN200 | 324.0 | 219.0 | 4.0 | 5.0 | 3.0 | 3.5 | 210 | 16 | SEAMLESS |
| DN300XDN150 | 324.0 | 159.0 | 4.0 | 5.0 | 2.5 | 3.0 | 210 | 16 | SEAMLESS |
*NOTE :
1. Dimension Per DIN 86089
2. Process : Cold Forming
3. Heat Treatment : Annealing After Cold Forming
4. Temp & Hold Time : 750℃±50℃, 30Min / Inch(THK)
Butt Welding Type CON. Reducer
■ Material : 2.1972.22
Unit:mm
| Pipe | Dimension | Remark | ||||||
|---|---|---|---|---|---|---|---|---|
| N/D | D | d | T | t | L | |||
| 10Bar | 14Bar | 10Bar | 14Bar | |||||
| DN350XDN300 | 368.0 | 324.0 | 4.0 | 5.5 | 4.0 | 5.0 | 300 | WELDED |
| DN350XDN250 | 368.0 | 276.0 | 4.0 | 5.5 | 3.0 | 4.0 | 300 | WELDED |
| DN350XDN200 | 368.0 | 219.0 | 4.0 | 5.5 | 3.0 | 3.5 | 300 | WELDED |
| DN400XDN350 | 419.0 | 368.0 | 4.0 | 6.0 | 4.0 | 5.0 | 325 | WELDED |
| DN400XDN300 | 419.0 | 324.0 | 4.0 | 6.0 | 4.0 | 5.0 | 325 | WELDED |
| DN400XDN250 | 419.0 | 276.0 | 4.0 | 6.0 | 3.0 | 4.0 | 325 | WELDED |
| DN450XDN400 | 457.0 | 419.0 | 4.0 | 6.0 | 4.0 | 6.0 | 350 | WELDED |
| DN450XDN350 | 457.0 | 368.0 | 4.0 | 6.0 | 4.0 | 5.5 | 350 | WELDED |
| DN450XDN300 | 457.0 | 324.0 | 4.0 | 6.0 | 4.0 | 5.0 | 350 | WELDED |
| DN500XDN450 | 508.0 | 457.0 | 4.5 | 6.5 | 4.0 | 6.0 | 375 | WELDED |
| DN500XDN400 | 508.0 | 419.0 | 4.5 | 6.5 | 4.0 | 6.0 | 375 | WELDED |
| DN500XDN350 | 508.0 | 368.0 | 4.5 | 6.5 | 4.0 | 5.5 | 375 | WELDED |
| DN600XDN500 | 610.0 | 508.0 | 5.0 | 8.0 | 4.5 | 6.5 | 400 | WELDED |
| DN600XDN450 | 610.0 | 457.0 | 5.0 | 8.0 | 4.0 | 6.0 | 400 | WELDED |
| DN600XDN400 | 610.0 | 419.0 | 5.0 | 8.0 | 4.0 | 6.0 | 400 | WELDED |
*NOTE :
1. Dimension Per DIN 86089
2. Process : Cold Forming
3. Heat Treatment : Annealing After Cold Forming
4. Temp & Hold Time : 750℃±50℃, 30Min / Inch(THK)
Butt Welding Type Con Reducer For Cu-Ni Pipe
■ Material : ASTM UNS C70600
Unit:mm
| Pipe | Dimension | Remark | ||||||
|---|---|---|---|---|---|---|---|---|
| N/D | D | d | T | t | H | |||
| S/10S | S/40S | S/10S | S/40S | |||||
| 3"X2" | 88.9 | 60.3 | 3.05 | 5.49 | 2.77 | 3.91 | 89 | SEAMLESS |
| 4"X2" | 114.3 | 60.3 | 3.05 | 6.02 | 2.77 | 3.91 | 102 | SEAMLESS |
| 4"X3" | 114.3 | 88.9 | 3.05 | 6.02 | 3.05 | 5.49 | 102 | SEAMLESS |
| 6"X2" | 168.3 | 60.3 | 3.40 | 7.11 | 2.77 | 3.91 | 140 | SEAMLESS |
| 6"X3" | 168.3 | 88.9 | 3.40 | 7.11 | 3.05 | 5.49 | 140 | SEAMLESS |
| 6"X4" | 168.3 | 114.3 | 3.40 | 7.11 | 3.05 | 6.02 | 140 | SEAMLESS |
| 8"X4" | 219.1 | 114.3 | 3.76 | 8.18 | 3.05 | 6.02 | 152 | SEAMLESS |
| 8"X6" | 219.1 | 168.3 | 3.76 | 8.18 | 3.40 | 7.11 | 152 | SEAMLESS |
| 10"X4" | 273.0 | 114.3 | 4.19 | 9.27 | 3.05 | 6.02 | 178 | SEAMLESS |
| 10"X6" | 273.0 | 168.3 | 4.19 | 9.27 | 3.40 | 7.11 | 178 | SEAMLESS |
| 10"X8" | 273.0 | 219.1 | 4.19 | 9.27 | 3.76 | 8.18 | 178 | SEAMLESS |
| 12"X6" | 323.8 | 168.3 | 4.57 | 9.52 | 3.40 | 7.11 | 203 | SEAMLESS |
| 12"X8" | 323.8 | 219.1 | 4.57 | 9.52 | 3.76 | 8.18 | 203 | SEAMLESS |
| 12"X10" | 323.8 | 273.0 | 4.57 | 9.52 | 4.19 | 9.27 | 203 | SEAMLESS |
*NOTE :
1. Dimension Per ASME B16.9
2. Process : Cold Forming
3. Heat Treatment : Annealing After Cold Forming
4. Temp & Hold Time : 750℃±50℃, 30Min / Inch(THK)
Butt Welding Type Con Reducer For Cu-Ni Pipe
■ Material : ASTM UNS C70600
Unit:mm
| Pipe | Dimension | Remark | ||||||
|---|---|---|---|---|---|---|---|---|
| N/D | D | d | T | t | H | |||
| S/10S | S/40S | S/10S | S/40S | |||||
| 14"X8" | 355.6 | 219.1 | 4.78 | 9.52 | 3.76 | 8.18 | 330 | WELDED |
| 14"X10" | 355.6 | 273.0 | 4.78 | 9.52 | 4.19 | 9.27 | 330 | WELDED |
| 14"X12" | 355.6 | 323.8 | 4.78 | 9.52 | 4.57 | 9.52 | 330 | WELDED |
| 16"X10" | 406.4 | 273.0 | 4.78 | 9.52 | 4.19 | 9.27 | 356 | WELDED |
| 16"X12" | 406.4 | 323.8 | 4.78 | 9.52 | 4.57 | 9.52 | 356 | WELDED |
| 16"X14" | 406.4 | 355.6 | 4.78 | 9.52 | 4.78 | 9.52 | 356 | WELDED |
| 18"X12" | 457.0 | 323.8 | 4.78 | 9.52 | 4.19 | 9.27 | 381 | WELDED |
| 18"X14" | 457.0 | 355.6 | 4.78 | 9.52 | 4.57 | 9.52 | 381 | WELDED |
| 18"X16" | 457.0 | 406.4 | 4.78 | 9.52 | 4.78 | 9.52 | 381 | WELDED |
| 20"X12" | 508.0 | 323.8 | 5.54 | 9.52 | 4.19 | 9.52 | 508 | WELDED |
| 20"X14" | 508.0 | 355.6 | 5.54 | 9.52 | 4.78 | 9.52 | 508 | WELDED |
| 20"X16" | 508.0 | 406.4 | 5.54 | 9.52 | 4.78 | 9.52 | 508 | WELDED |
| 20"X18" | 508.0 | 457.0 | 5.54 | 9.52 | 4.78 | 9.52 | 508 | WELDED |
| 24"X16" | 610.0 | 406.4 | 6.35 | 9.52 | 4.78 | 9.52 | 508 | WELDED |
| 24"X18" | 610.0 | 457.0 | 6.35 | 9.52 | 4.78 | 9.52 | 508 | WELDED |
| 24"X20" | 610.0 | 508.0 | 6.35 | 9.52 | 5.54 | 9.52 | 508 | WELDED |
| 28"X18" | 711.0 | 457.0 | 7.92 | 9.52 | 4.78 | 9.52 | 610 | WELDED |
| 28"X20" | 711.0 | 508.0 | 7.92 | 9.52 | 5.54 | 9.52 | 610 | WELDED |
| 28"X24" | 711.0 | 610.0 | 7.92 | 9.52 | 6.35 | 9.52 | 610 | WELDED |
*NOTE :
1. Dimension Per ASME B16.9
2. Process : Cold Forming
3. Heat Treatment : Annealing After Cold Forming
4. Temp & Hold Time : 750℃±50℃, 30Min / Inch(THK)
선박 배관, 해양배관, 플랜트 산업설비, 담수설비 및 특수선 분야 등 동합금 관 이음쇠 전문 생산 업체
폐사는 1981년 설립이래 34년간 동합금 관 이음쇠를 전문적으로 생산해왔으며, 국내 조선 산업발전에 많은 기여를 해왔다고 자부하고 있습니다.
저희 제품의 주요 사용처로는 선박 배관, 해양배관, 플랜트 산업설비, 담수설비 및 특수선 분야 등 두루 사용되어 지고 있으며, 오랜 기간 축적된 기술 노하우와 뛰어난 품질체계를 확립하여 고객들에게 완벽한 제품을 제공하고자 노력하고 있습니다.
미래는 첨단 기술 분야에서 제품의 질과 기술의 혁신을 약속하는 것입니다. 이 시대에 부응하고자 기술혁신형 중소기업 및 벤처기업으로써 열정과 패기로 새로운 기술 개발에 노력을 견주하고 있습니다.
또한, 지속적인 R&D 투자를 통한 기술 선도와 엄격한 품질관리를 통한 고 신뢰성 제품의 생산으로 고객만족을 위하여 최선을 다할 것이며, 고객과 함께 성장하는 기업이 되도록 노력 할 것입니다. 또한, 21세기 국가산업 발전의 일익을 담당하며 세계적인 브랜드로 성장시켜 이 분야의 기술을 선도하는 세계적인 기업으로 성장하도록 노력하겠습니다.
대한민국 조선기자재 산업 온라인 플랫폼
ⓒ2025 Komarine Inc. All rights reserved.
대한민국 조선기자재 산업 온라인 플랫폼
ⓒ2025 Komarine Inc. All rights reserved.