| English | 선택 | |
| 한국어 | 선택 | |
| Русский | 선택 |
(주)로보웰
SPOT W/D M/C FOR STRAKE/TONGUE
모델
-
시리즈
96-2 (For LNG Carrier)
제품 소개
SPOT W/D M/C FOR STRAKE/TONGUE
SEAM 용접을 하기 위한 선행 공정에서 STRAKE와 TONGUE에 저항 스폿 용접을 실시
아래보기 자세, 오버헤드 자세 및 횡향 자세에서 주행 및 용접이 가능
제품사양
WELDING CURRENT
1,500 Amp
TRAVEL SPEED
MAX. 2,500 mm/min
WELDING MATERIAL
0.7+0.5+0.7mmt & 0.7+1.0mmt INVAR STEEL
APPLICABLE AIR PRESSURE
1 - 7 kgf/cm2
ELECTRODE PRESSURE METHOD
BY AIR CYLINDER
TRANSFORMER
7KVA 100%, 10KVA 50%
DRIVE UNIT
SERVO MOTOR, 600 RPM, 0.35KW (OPTION)
REDUCTION RATE
30 : 1
WELDING ELECTRODE
∅10
LENGTH OF CABLE
STANDARD - 25M / OPTION - 40M
DIMENSION / WEIGHT
194W x 255H x 324L / Ab. 15KG
METHOD OF ADJUST WELD PITCH
ACTUAL LENGTH CONTROL BY ENCODER
CONSIST OF
WELDING CARRIAGE, MOBILE CARRIAGE, CABLE & HOSES, REMOTE PENDANT
생산 제품
96-2 (For LNG Carrier)
AUTO TIG W/D M/C FOR COLLAR STUD
INVERTER SEAM W/D M/C FOR STRAKE/TONGUE
SPOT W/D M/C FOR STRAKE/TONGUE
AUTO TIG W/D M/C FOR LONGITUDINAL DIHEDRAL
AUTO TIG W/D M/C FOR END STRAKE
AUTO TIG W/D M/C FOR COUPLER BASE
AUTO TIG W/D M/C FOR INVAR STRIP
INVAR TUBE SEAM W/D M/C
GTAW (GAS TIG AUTO WELDING GENERATOR)
MEMBRANE MARK-III (For LNG Carrier)
TRIPLEX BONDING MACHINE-NON-RAIL TYPE
MARK-III PLASMAWELDING MACHINE
TRIPLEX BONDING MACHINE-RAIL TYPE
TRIPLEX BONDING MACHINE-RAIL-SIDE TYPE
MOSS (For LNG Carrier)
Automatic System
T-BAR 자동용접 라인
AL MIG 파이프 용접장비
보일러 판넬 자동용접장비
ROLLER 육성 용접장비
SAW/FCAW 복합 TEST 용접장비
SAW 판계 용접장비
24-POLE LONGI 용접장비
파이프 내면/외면 용접장비
Welding Equipment
