매그스위치, 자석제품, 조선용 치공구, 면취기, 푸셔, 매그드릴,중량물 리프팅 솔루션
NHC-HL
| WLL(TON) | Jaw Opening | A1 | A2 | B | C | D1 | D2 | E | F | ØG | I | J | Weight(kg) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 0-15 | 25 | 4 | 34 | 182 | 25 | 38 | 40 | 114 | 30 | 15 | 32 | 2.3 |
| 2 | 3-22 | 32 | 5 | 41 | 230 | 32 | 53 | 52 | 145 | 35 | 16 | 42 | 4.9 |
| 3 | 10-35 | 45 | 5 | 60 | 268 | 35 | 73 | 65 | 182 | 40 | 22 | 48 | 8.6 |
| No. | ASS’Y NAME | No. | PART NAME | No. | ASS’Y NAME | No. | PART NAME |
|---|---|---|---|---|---|---|---|
| 1 | BODY | - | - | 4 | PAD ASS’Y | 4-1 | PAD |
| 2 | CAM | - | - | 4-2 | BOLT & NUT | ||
| 3 | CAM BOLT ASS’Y | 3-1 | BOLT & NUT | 5 | SPRING PIN | - | - |
| 3-2 | SPRING PIN | 6 | SPRING | - | - |
Features
NHC-HL has the built-in safety lock(spring) that prevents a work piece from slipping due to the initial clamping force caused by the spring even if the wire rope becomes loose during the operation.
How to use
- When the jaw opening gets wider by pushing the cam down, insert a work piece into the inside end of the clamp’s jaw opening.
Release the cam and then the safety lock will be automatically locked
- Clamp the center of gravity of a work piece in order to equally distribute the weight of the work piece.
Warnings
- Do not exceed the rated capacity specified on the clamp.
- Lift a work piece only which falls within the jaw opening range specified in the instruction manual.
- Do not vertically lift work pieces with horizontal clamps.
- Never lift narrow work pieces.
- Never lift bendable work pieces.
