매그스위치, 자석제품, 조선용 치공구, 면취기, 푸셔, 매그드릴,중량물 리프팅 솔루션
NVC-LB
| WLL(TON) | Jaw Opening | A1 | A2 | B | C | D1 | D2 | E | F | ØG | I | J | K | Weight(kg) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3 | 0-35 | 40 | 5 | 58 | 196 | 36 | 50 | 128 | 368 | 55 | 19 | 43 | 73 | 13.0 |
| 5 | 0-40 | 50 | 6 | 56 | 225 | 41 | 52 | 142 | 420 | 60 | 22 | 45 | 81 | 17.4 |
| No. | ASS’Y NAME | No. | PART NAME | No. | ASS’Y NAME | No. | PART NAME |
|---|---|---|---|---|---|---|---|
| 1 | BODY | - | - | 5 | CAM BOLT & NUT | - | - |
| 2 | SHACKLE | - | - | 6 | JAW ASS’Y | 6-1 | SWIVEL JAW |
| 3 | SHACKLE PIN | - | - | 6-2 | BOLT & NUT | ||
| 4 | CAM ASS’Y | 4-1 | CAM | 7 | LEVER ASS’Y | 7-1 | SAFETY LEVER |
| 4-2 | LINK | 7-2 | STOPPER ASS’Y | ||||
| 4-3 | SPRING PIN | 7-3 | BOLT & NUT | ||||
| 4-4 | RIVET PIN | 8 | LOCK SPRING | - | - |
Features
- Due to the safety lever, the NVC-LB is convenient to use and also easy to separate the clamp after working with thick steel plates.
Since the lever is attached to the inside of the clamp, there is a lower possibility of damage by the mid-air collision of clamps.
- Even for a high working place, it is easy to separate the clamp from the ground by connecting a rope to the safety lever.
How to use
- Insert a steel plate into the inside end of the clamp's jaw opening and then lock the safety lever.
- Clamp the center of gravity of the work piece in order to equally distribute the weight of the work piece.
- When pulling the rope to release, pull it lightly with wrist snap.
Warnings
- Do not exceed the rated capacity specified on the clamp.
- Lift a work piece only which falls within the jaw opening range specified in the instruction manual.
- Never lift two or more work pieces with one clamp.
- Lift a work piece only after checking the biting location and the biting condition of the work piece, and the proper functioning of
the safety lever.
- When lifting a work piece, a signal man must be outside the roattion radius of a work piece to send a signal to a crane operator
