Features

Severe Service ; Many valves are marketed for critical service control, but few can provide the complete solution needed for the grueling conditions of Severs Service. The DRAG 100D Valve was designed solely for this purpose to meet your specific control valve needs. Whatever your application, for severe service control, there is only one intelligent choice.

Solutions ; The DRAG 100D control valve provides the complete solution because it eliminates problems of cavitation, Noise, erosion and vibration by effectively controlling fluid velocity.

Technology ; The technologically advanced design of the DRAG disk stack trim controls fluid velocities by forcing the fluid through a series of right angle turns. The exact number of turns is scientifically calculated to achieve low fluid velocities consistent with the needs of the application. This assures long, trouble-free control valve life.

Specifications

- Pressure Drop Stages : Up to 40
- Valve size : NPS 1/4 (DN 8) to NPS 36 (DN 900)
- Pressure Rating : ANSI Class 150 to 4500(DIN 10 to 400)
- Fluid : Metal Seated : -250℉ to 1050℉
- Temperature Range : -160℃ to 565℃
- Body Type : Globe or Angle design

- End Connections :

ASME B16.5, Flanged end, RF/ RTJ
ASME B16.11, Socket Welding end
ASME B16.25, Butt-welding end
Special ends including various clamped–joint hub configurations

- Seat Face Design : Metallic or Soft Seated
- Plug Design : Unbalanced, Balanced, Pressurized Seated
- Characteristic : Linear, Equal %, Quick Open or Custom Design
- Range ability : Minimum of 30:1, Up to 100:1 for larger valves designed to meet application needs
- Materials : Carbon Steel, Chrome moly, Stainless steel, and all other ANSI B16.34 Material
- Shutoff Capabilities :

Unbalanced Plug ; Soft Seated - ANSI Class VI, Metal seated – ANSI Class V
Balanced Plug ; Soft Seated - ANSI Class VI, Metal seated – ANSI Class IV or V, MSS-SP-61
Pressurized Seated Plug ; Metal seated – MSS-SP-61

- Maximum : Metal seated : Up to full ANSI rating